A DC-DC converter based on modified flyback converter topology

Cristian Pesce; Ramon Blasco Gimenez; Javier Riedemann; Ivan Andrade; Ruben Pena

doi:10.1109/TLA.2016.7785917

A DC-DC converter based on modified flyback converter topology

Cristian Pesce, Ramon Blasco Gimenez, Javier Riedemann, Ivan Andrade, Ruben Pena

Resultado de la investigación: Contribución a una revista › Artículo › revisión exhaustiva

13 Citas (Scopus)

Resumen

This paper proposes a DC-DC power converter topology based on a modified Flyback Converter (FC). The aim of the proposed topology is to increase the voltage gain by connecting the inputs of N isolated FCs in parallel and the N secondary inductances in series. This scheme reduces the current in each switch then reducing the associated losses. A single diode and an output capacitance complete the power converter circuit. A Proportional+Integral (PI) controller is used to control the output voltage with the converter operating in discontinuous current mode. The proposed converter can handle more power than the standard FC with a low number of active power devices. The system is modeled using PSIM platform and experimental results are presented considering a 1kW prototype.

Idioma original	Inglés
Número de artículo	7785917
Páginas (desde-hasta)	3949-3956
Número de páginas	8
Publicación	IEEE Latin America Transactions
Volumen	14
N.º	9
DOI	https://doi.org/10.1109/TLA.2016.7785917
Estado	Publicada - sept. 2016
Publicado de forma externa	Sí

Acceder al documento

10.1109/TLA.2016.7785917

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

@article{6de79075dfc34a4bb3a59efd1f157e59,

title = "A DC-DC converter based on modified flyback converter topology",

abstract = "This paper proposes a DC-DC power converter topology based on a modified Flyback Converter (FC). The aim of the proposed topology is to increase the voltage gain by connecting the inputs of N isolated FCs in parallel and the N secondary inductances in series. This scheme reduces the current in each switch then reducing the associated losses. A single diode and an output capacitance complete the power converter circuit. A Proportional+Integral (PI) controller is used to control the output voltage with the converter operating in discontinuous current mode. The proposed converter can handle more power than the standard FC with a low number of active power devices. The system is modeled using PSIM platform and experimental results are presented considering a 1kW prototype.",

keywords = "DC-DC Power Converters, Flybacks Transformers, Switching Loss",

author = "Cristian Pesce and Gimenez, {Ramon Blasco} and Javier Riedemann and Ivan Andrade and Ruben Pena",

note = "Publisher Copyright: {\textcopyright} 2003-2012 IEEE.",

year = "2016",

month = sep,

doi = "10.1109/TLA.2016.7785917",

language = "English",

volume = "14",

pages = "3949--3956",

journal = "IEEE Latin America Transactions",

issn = "1548-0992",

number = "9",

}

TY - JOUR

T1 - A DC-DC converter based on modified flyback converter topology

AU - Pesce, Cristian

AU - Gimenez, Ramon Blasco

AU - Riedemann, Javier

AU - Andrade, Ivan

AU - Pena, Ruben

PY - 2016/9

Y1 - 2016/9

N2 - This paper proposes a DC-DC power converter topology based on a modified Flyback Converter (FC). The aim of the proposed topology is to increase the voltage gain by connecting the inputs of N isolated FCs in parallel and the N secondary inductances in series. This scheme reduces the current in each switch then reducing the associated losses. A single diode and an output capacitance complete the power converter circuit. A Proportional+Integral (PI) controller is used to control the output voltage with the converter operating in discontinuous current mode. The proposed converter can handle more power than the standard FC with a low number of active power devices. The system is modeled using PSIM platform and experimental results are presented considering a 1kW prototype.

AB - This paper proposes a DC-DC power converter topology based on a modified Flyback Converter (FC). The aim of the proposed topology is to increase the voltage gain by connecting the inputs of N isolated FCs in parallel and the N secondary inductances in series. This scheme reduces the current in each switch then reducing the associated losses. A single diode and an output capacitance complete the power converter circuit. A Proportional+Integral (PI) controller is used to control the output voltage with the converter operating in discontinuous current mode. The proposed converter can handle more power than the standard FC with a low number of active power devices. The system is modeled using PSIM platform and experimental results are presented considering a 1kW prototype.

KW - DC-DC Power Converters

KW - Flybacks Transformers

KW - Switching Loss

UR - http://www.scopus.com/inward/record.url?scp=85007451770&partnerID=8YFLogxK

U2 - 10.1109/TLA.2016.7785917

DO - 10.1109/TLA.2016.7785917

M3 - Article

AN - SCOPUS:85007451770

VL - 14

SP - 3949

EP - 3956

JO - IEEE Latin America Transactions

JF - IEEE Latin America Transactions

SN - 1548-0992

IS - 9

M1 - 7785917

ER -

A DC-DC converter based on modified flyback converter topology

Resumen

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto