TY - JOUR
T1 - Mechanism and leaching kinetics of molybdenite concentrate in a hydrogen peroxide-acid system
AU - Aracena, Alvaro
AU - Azocar, Alan
AU - Ibáñez, Juan Patricio
AU - Jerez, Oscar
N1 - Publisher Copyright:
© Wroclaw University of Science and Technology.
PY - 2019
Y1 - 2019
N2 - The mechanism and leaching kinetics of a molybdenite concentrate in a H 2 O 2 -H2SO 4 system were studied. The experimental work was performed in a batch reactor equipped with a condenser, a mechanical agitator and a temperature control system. The effects of the temperature, H 2 O 2 and H 2 SO 4 concentrations, particle size, liquid/solid ratio and agitation speed on the Mo recovery were investigated. The thermodynamic results showed that the leaching mechanism it was governed by several intermediate reactions; however, the influences of sulfuric acid and passivation were not observed in the reaction. The most predominant experimental result was the maximum Mo recovery of 81.3% by leaching 64 μm particles at 333 K (60 °C) for 5400 s (90 min). The molybdenum recovery was generally enhanced by increasing the H 2 O 2 and H 2 SO 4 concentrations. However, at H 2 SO 4 concentrations higher than 1.0 mol/dm 3 , the Mo recovery decreased. Although the agitation speed affected the Mo recovery considerably, high recoveries could be still obtained without mixing. The experimental results and XRD analysis confirmed the reaction mechanisms. The leaching kinetics were analyzed using a shrinking core model in which the rate was controlled by diffusion through a porous layer with radius ro. The reaction rate orders were 1.0 and 0.2 for the H 2 O 2 and H2SO4 concentrations, respectively, and the rate was inversely proportional to the square of the initial particle radius. The calculated activation energy was 75.2 kJ/mol in the temperature range of 278-333 K (5-60 °C).
AB - The mechanism and leaching kinetics of a molybdenite concentrate in a H 2 O 2 -H2SO 4 system were studied. The experimental work was performed in a batch reactor equipped with a condenser, a mechanical agitator and a temperature control system. The effects of the temperature, H 2 O 2 and H 2 SO 4 concentrations, particle size, liquid/solid ratio and agitation speed on the Mo recovery were investigated. The thermodynamic results showed that the leaching mechanism it was governed by several intermediate reactions; however, the influences of sulfuric acid and passivation were not observed in the reaction. The most predominant experimental result was the maximum Mo recovery of 81.3% by leaching 64 μm particles at 333 K (60 °C) for 5400 s (90 min). The molybdenum recovery was generally enhanced by increasing the H 2 O 2 and H 2 SO 4 concentrations. However, at H 2 SO 4 concentrations higher than 1.0 mol/dm 3 , the Mo recovery decreased. Although the agitation speed affected the Mo recovery considerably, high recoveries could be still obtained without mixing. The experimental results and XRD analysis confirmed the reaction mechanisms. The leaching kinetics were analyzed using a shrinking core model in which the rate was controlled by diffusion through a porous layer with radius ro. The reaction rate orders were 1.0 and 0.2 for the H 2 O 2 and H2SO4 concentrations, respectively, and the rate was inversely proportional to the square of the initial particle radius. The calculated activation energy was 75.2 kJ/mol in the temperature range of 278-333 K (5-60 °C).
KW - Hydrogen peroxide
KW - Kinetics
KW - Mechanism of reaction
KW - Molybdenite concentrate
UR - http://www.scopus.com/inward/record.url?scp=85065746135&partnerID=8YFLogxK
U2 - 10.5277/ppmp18139
DO - 10.5277/ppmp18139
M3 - Article
AN - SCOPUS:85065746135
SN - 1643-1049
VL - 55
SP - 140
EP - 152
JO - Physicochemical Problems of Mineral Processing
JF - Physicochemical Problems of Mineral Processing
IS - 1
ER -